Page 27
Troubleshooting
Problem
Possible Solution
The Generator will not switch on and the power switch
does not illuminate.
• Ensure power cord is plugged into the Generator
and that the power socket is turned on.
• Check the fuse in the power cord plug.
• Contact your service provider.
Compressors are running but pressure is not building.
• Contact your service provider.
The mass spec is reporting low pressure.
• Check pressure gauges are showing normal
pressure.
• Contact your service provider.
Yellow “SERVICE” LED on front panel is on constantly.
• A compressor(s) due for service. Contact your
service provider.
• Refer to Service Indication section of this manual for
further information.
Yellow “SERVICE” LED on front panel is flashing.
• A compressor(s) has not cycled for 8 hours. Refer to
the Run Time Alarm section of this manual.
• Ensure ambient temperatures are within the
specification.
• Turn the Generator off and on to reset the alarm and
contact your service provider.
Summary of Contents for Genius 1024
Page 1: ...Genius1024 User Manual Rev 5 PN UM 0018 RSID 1917 15 11 21 Genius 1024 User Manual...
Page 29: ...Page 29 Header Sub Header Body...
Page 30: ...Page 30...
Page 31: ...Page 31...
