Peak Pilates fit REFORMER Assembly Manual And Owner'S Manual Download Page 5

3

  

www.peakpilates.com

Proper Use

This equipment is only to be used as outlined in the Owner’s Manual. It is imperative that the fit

 reformer be used 

properly to avoid injury or damage to the unit. Use only components provided by the manufacturer. 

DO NOT

  use parts or accessories or modify the machine in any way not approved by Peak Pilates

®

. Keep 

a three-foot area (about one meter) around the equipment clear of obstructions. Make sure the machine is 
used on a level surface.

Specific Operating Warnings

  Be certain that all hardware is fully tightened before beginning to exercise.

  Verify that no gaps exist between the coils or other defects are evident in the springs. If any defects are seen, 

the spring(s) must be immediately replaced.

  Verify that no tears or excessive wear are evident in the ropes, foot loops, foot strap, or double loops. If 

excessive wear is evident, the ropes, strap, or loops must be immediately replaced.

  Do not tip the machine during use.

  Children must not be allowed near this machine. Teenagers and/or physically challenged individuals require 

supervision.

  It is the purchaser’s sole responsibility to instruct end users and supervising personnel on the proper operating 

procedures of the fit

 reformer.

  Verify that all adjustable components are properly engaged in the exercise and not the in storage positions 

before beginning to exercise.

  We strongly recommend that the end user’s physical condition be evaluated by a physician prior to beginning 

any exercise program.

  After each use, inspect the hardware that connects the foot bar support bar to the foot bar.  The hardware 

should be snugly tightened so it creates friction at the pivot point and thus ensures proper function of the 
self-locking feature.

  Do not use the foot bar as a handle when lifting or moving the fit

 reformer.

NOTE:

 

Understanding each and every warning to the fullest is critical. If any of these warnings are 

unclear, contact Peak Pilates   for clarification.

®

NOTE:

 

We strongly recommend that all users of Peak Pilates

®

 

 

exercise equipment be informed of the 

following information prior to use.

PeakPilates Fit Owners Manual-2021.indd   3

PeakPilates Fit Owners Manual-2021.indd   3

8/9/21   9:42 AM

8/9/21   9:42 AM

Summary of Contents for fit REFORMER

























Reviews: