14
fit
™
reformer owner’s manual
4
5
MAKE SURE THAT THE GEAR BAR IS FULLY ENGAGED IN ONE OF THE FOUR POSITIONS BEFORE
BEGINNING TO EXERCISE. FAILURE TO DO SO COULD RESULT IN DAMAGE TO THE REFORMER OR
INJURY TO THE USER.
that the bar drops into the slot and is fully engaged.
Pull out the gear block and place it in the location
hole that corresponds to the gear bar position. Make
sure that the pin is completely engaged in the hole.
Gear bar
Gear block
-1
-1
1
1
2
2
3
3
Re-attach at least one spring to the gear bar.
Adjusting the Headrest
The headrest has three positions:
Flat, as shown in the figure
Half raised
Fully raised
To change the headrest from the flat position to the
half-raised position:
Lift and push in the headrest support block until
1
VERIFY THAT THE HEADREST SUPPORT BLOCK IS PROPERLY SET BEFORE BEGINNING ANY EXERCISE.
2
it rests on its first ledge.
To change the headrest to the fully raised position:
Lift the headrest and push the headrest support
block in all the way.
Move gear block
ASSEMBLY
!
WARNING
!
WARNING
PeakPilates Fit Owners Manual-2021.indd 14
PeakPilates Fit Owners Manual-2021.indd 14
8/9/21 9:42 AM
8/9/21 9:42 AM
