6
MOUNT INSTALLATION
The Heater/Defroster may be mounted to any solid surface, such as a vehicle dashboard or console,
using the Velcro tape or the provided mounting screws.
Mount Installation Precautions
•
Never mount the Heater/Defroster near flammable materials.
•
Never mount the Heater/Defroster where it may be exposed to fire, direct flame or high-heat
sources.
•
Never mount the Heater/Defroster where the air inlet vent/fan or heat outlet vent may be blocked.
•
Always mount the Heater/Defroster in a well-ventilated area.
•
Ensure the mounting surface is solid and flat.
Semi-Permanent Installation
1. Slide and remove the swivel base from the Heater/Defroster.
2. Clean the Heater/Defroster swivel base, removing any dirt, oil or grease.
3. Clean the mounting surface area in the same manner.
4. Separate the Velcro tape and remove the tape backing.
5. Firmly apply one half of the Velcro tape to bottom of the Heater/Defroster swivel base.
6. Firmly apply the other half of the Velcro tape to the desired mounting surface.
7.
Position the Heater/Defroster swivel base in the desired position and press firmly to secure in
place.
8. Attach the Heater/Defroster to the swivel base and position as desired using the ball swivel.
9. Route and secure the 12-volt DC adapter power cord away from any vehicle controls.
Permanent Installation
1. Slide and remove the swivel base from the Heater/Defroster.
2. Using the two provided screws, mount the Heater/Defroster swivel base in the desired location. If
pilot holes are required:
a. Using the swivel base screw holes as a template, mark the positions of the screw holes on the
desired mounting surface.
b. Drill pilot holes with appropriate size drill.
3. Attach the Heater/Defroster to the swivel base and position as desired using the ball swivel.
4. Route and secure the 12-volt DC adapter power cord away from any vehicle controls.