B
BALANCED XLR OUTPUT: Provides balanced stereo analog output to a power
amplifier or powered subwoofer. Note: this output can be used in conjunction with the
RCA output to connect to a power amplifier and one or more subwoofers
simultaneously.
C
RCA OUTPUT: Provides stereo analog output to a power amplifier or powered
subwoofer. Note: this output can be used in conjunction with the XLR output to connect
to a power amplifier and one or more subwoofers simultaneously.
D
FILTER Button: FLAT provides extremely accurate internal digital-to-analog
conversion. SMOOTH typically provides a more sonically pleasing internal digital-to-
analog conversion. Please audition both settings and select the one that sounds best
to you. Note: When measuring the sonaDAC using test equipment, the FLAT setting is
recommended.
E
OPT1 & OPT2 Inputs: Accept digital audio input from a Toslink optical digital audio
output up to 96kHz. Toslink digital audio outputs are common on most digital audio
sources including; disc players, cable boxes, older Apple TVs and so forth.
F
COAX1 & COAX2 Inputs:
Accept digital audio input from a Coaxial (RCA style) digital
audio output
up to 192kHz. A
coaxial digital audio output is available on many digital
audio sources including disc players, cable boxes, the SONOS Connect and so forth.
G
DC 5V Output: Provides a 5-volt DC output for mobile device charging and future
expansion. Note: this is NOT a USB audio input. Useful for the powering the Peachtree
Audio Bt1 Bluetooth adapter or the Google Chromecast Audio Wi-Fi adapter.
H
USB Input:
Accepts up to 384kHz (including DSD 2.8 & 5.6MHz) digital audio input
from a PC/Mac when the USB button is set to 2.0 (recommended for all Mac users and
Windows PC users with music files above 96kHz). Accepts up to 96kHz digital audio
input from a PC/Mac when the USB button is set to 1.0 (recommended for all Windows
PC users with music files that do NOT exceed 96kHz). PC Users Note: For playback of
files above 96kHz, Windows requires that you install the included driver on your PC.
I
USB 1.0/2.0 Button: Mac users set this to 2.0. Windows PC users, set this to 1.0 if
using music files that do NOT exceed 96kHz. Windows PC users, set this to 2.0 if
using music files that exceed 96kHz.
PC Users Note: For playback of files above
96kHz, Windows requires that you install the included driver on your PC.
J
TRIGGER 12V:
Enables power on/off control of another product with a 12V trigger
input similar to the sonaAMP. Insert one end of a 3.5mm cable into this port and
connect the other end to a 12V trigger input of the product to be controlled.
K
AC INPUT & Fuse Holder: For connection to a compatible AC power source using the
included power cord. The fuse can be replaced after turning the POWER switch OFF
and disconnecting the AC INPUT. Contact an authorized Peachtree Audio dealer,
distributor or service center for any questions regarding proper fuse values.
**CAUTION** Using an improper fuse value may cause damage to the unit.
L
115/230 AC VOLTAGE SELECTOR: Changes the AC input voltage compatibility
between 115V and 230V. The voltage may be selected after turning the POWER
switch OFF, disconnecting the AC INPUT, and inserting the correct fuse value into the
fuse holder. **CAUTION** the improper setting may cause damage to the unit.
M
POWER ON/OFF Switch: Connects and disconnects AC input power to the unit.
REAR PANEL
BALANCED XLR OUTPUT
R
L
R
L
RCA OUTPUT
1
15V
230V
AC~50/60Hz
VOLTAGE SELECTOR
AC INPUT
POWER
ON
OFF
OPT1
OPT2
COAX1
COAX2
DC 5V
USB
USB
2.0
1.0
TRIGGER
12V
FILTER
SMOOTH
FLAT
1
5 6
12
2
3
4
7 8 9
10
11
