FRONT PANEL
B
On Standby Button
/
:
With the AC power cord connected and the rear panel
POWER
switch set to
ON
,
this button toggles the unit between On mode which
lights the LED blue and Standby mode which lights the LED red
.
Interested in the Green Movement?
• The GaN400 meets European RoHS standards for non hazardous metals
-
• The GaN400 draws less than half a watt of power in standby mode
• The 400w amps in the GaN400 are an industry leading 96% efficient and generate
little heat as result.
• We are committed to continue exploring additional methods for making our products
even more environmentally friendly
TROUBLESHOOTING
ISSUE
SOLUTIONS
The GaN400 will not power on
Check that the power switch on the back panel
is on If it is the on standby LED on the front
.
,
/
panel LED should be lit red Check that the AC
.
outlet is functioning correctly by plugging in a
lamp or other device to confrm its operation
.
Check that the product controlling the GaN400
is turned on if using the 12V trigger input feature
of the GaN500
.
The GaN400 powers on but there is no sound
,
Check that the INPUT SELECTION switch
on the rear panel is set to the proper input
:
UNBALANCED OR BALANCED Note Do
.
:
not change the input selection while the unit is
powered on
.
GaN
400
1
Summary of Contents for GaN400
Page 1: ...GaN400 G N a 400 ...
