5
6.
Pairing
*Only required if choosing to change sensor position or singular
replacement.
6.1Automatic Lightning Pairing For Internal Sensors
(Quick Pairing)
The Internal Sensor has automatic lightning pairing function. Each
sensor is free to be installed in any tyre. Tyre position will be
automatically defined on the display within 2-5 minutes
(speed >20km/h).
After 5 times of automatic pairing, the wheel position is locked & the
automatic pairing function is inactivated for saving battery power.
At the time when the wheel position is changed, press the “OK”
button for 5 seconds until a beep is heard. Thus, the automatic
lightning pairing function will be re-activated.
6.2 Manual Pairing For Internal Sensors(Standard Pairing)
a. In the pressure display interface (pictured), hold the “SET” button
for 3 seconds and release when a “beep” is heard, the LCD will
display the flashing left front wheel.
b. While the left front tyre symbol is flashing, press the “OK” button
to show the ID learning mode. The ID number of the left front tyre
sensor LCD is displayed as shown.
P1
