1
1
a
1.Display Installation
1. The unit may be affixed to the dashboard of the car, using the 3M
adhesive tape supplied. Ensure that the display does not impair
driving vision.
2. First time system boot, hold down the “OK” and “ ” button
simultaneously for 3 seconds, until the LCD display comes to life.
It is not required to shut down the unit in daily use.The unit will be in
sleep mode in 15 minutes if there isn't any vibration detected.
3. To shut down, hold down the “OK” and “ ” button simultaneous-
ly for 3 seconds, on release you will hear a “beep” sound. This
will indicate that the system is shutdown. This should only be
required when resetting the unit.
2.
Sensor Installation
2.1
External SensorInstall
a.Ensure that the sensor is used in the corresponding position
displayed on the sensor. LF- Left Front RF – Right Front LR – Left
Rear RR – Right Rear
External Sensor Install
b. Install the anti-theft screw
c. Install the sensor
d. Tighten the sensor with nut provided nut wrench in reverse
direction.
e. Check to ensure no leakage and sensor is securely fastened.
d
4
c
3
b
2
