4. SVR DEVICE - INSTALL
SPACER & CONTROL BOARD
Install rod spacer block with (2) included
wood/metal screws – feed wires through
slot in block.
Install top rod before control board.
Install control board assembly – feed wire
through slot under circuit board and secure
assembly with (4) wood/metal screws.
Make wire connections after control board
installed. Push extra wire into door cavity.
Install Chassis/Head cover
6EWS STS – EXIT DEVICE TRIM
88339 Rev0 – 04/21/20
6. INSTALL BATTERIES AND
BATTERY COVER
Install batteries and battery cover with
(2) #8-32 x 1" pan head screws.
5. INSTALL BATTERY PACK
Plug battery wire into control board.
Install battery pack over two studs on
mounting plate and snap battery pack
onto retainers on control board
assembly.
BATTERY
PACK
BATTERY
COVER
WIRE SLOT
MOTOR
WIRE
SOCKET
ROD
SPACER
BLOCK
CONTROL
BOARD
ASSEMBLY
TOP ROD
BATTERY
PLUG
BATTERY
RETAINERS
