PDI-TR100 Table Radio
User Manual
Document PD196-191R3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
P a g e
|
5
Battery Installation
Two AAA batteries are provided to keep the table radio’s clock running and backup the internal memory should
power be interrupted. The batteries do not power the table radio or light the display.
1.
Locate the clock battery cover on the back of the table radio.
2.
Press the tab on the cover and remove.
3.
Insert each of the AAA batteries provided into the battery
compartment making certain to match the battery (+) and (-)
polarities as shown.
4.
Reinstall the clock battery cover making certain the tab snaps in
place to secure the cover.
WARNING: Do not expose the batteries to excessive heat such as
sunshine, fire, or the like.
Antenna Installation
The table radio relies upon two externally connected antennas
for signal.
FM ANTENNA
1.
Connect the supplied FM antenna to the FM antenna
jack on the back of the radio.
2.
Alternatively, an FM signal available on a CATV
system cable can be connected. Contact your cable
provider for assistance.
AM ANTENNA
1.
Connect the supplied AM antenna to the AM antenna
jack on the back of the radio.
