PDI-TR100 Table Radio
User Manual
Document PD196-191R3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
P a g e
|
12
ADDITIONAL SETTINGS
Display Brightness Adjustment
1.
Place the radio in STANDBY mode.
2.
Push the Tuning Knob in for 3 seconds until the display
changes to
DIMMER ALARM.
3.
Turn the tuning knob clockwise or counter clockwise to set
the display brightness to either HI (high), MI (medium), or
LO (low).
4.
Push the tuning knob in to advance the selection to
ALARM
.
5.
Turn the tuning knob clockwise or counter clockwise to turn
the ALARM on or off.
Setting the Alarm
1.
To set the Alarm Time, turn the ALARM On and then press
the Tuning Knob once to display the Alarm’s time.
2.
Turn the Tuning knob clockwise or counter clockwise to set
the desired hour.
3.
Push in on the Tuning knob until the minute display begins to
blink.
4.
Turn the Tuning knob clockwise or counter clockwise to set
the desired minutes.
5.
Push in on the Tuning knob to exit.
6.
Turn either the Volume or Tuning knob to silence the Alarm.
Bass and Treble Adjustment
1.
Place the radio in AM or FM mode.
2.
Push the tuning knob in for 3 seconds until the display
changes to BASS TREBLE.
3.
Turn the tuning knob clockwise or counter clockwise to set
the Bass level (-3 ~ 3).
4.
Push the tuning knob in to advance the selection to Treble.
5.
Turn the Tuning Knob clockwise or counter clockwise to set the Treble level (-3 ~ 3).
6.
Push in on the Tuning knob to exit.
