PDi PDI-P23LCDE Quick Start Manual Download Page 1

 

Communication

 

  

System Inc. 

Better Solutions Are Within Reach

TM

 

 

MODEL NUMBER:

 

PDI-P23LCDE TV With DVD 

Document Number:

 

PD196-221R1 

 

QUICK START GUIDE 

Page 1 of 14 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH +1-937-743-6010  PH +1-937-743-5664  

 

 

 

PRODUCT ACCESSORIES 

(Not Included with TV) 

Programming Remote 

PD108-420 

Patient Remote 

PD108-421 

100mm VESA Wall Mount 

PD168-103 

¼” to 6-Pin Jumper Cable 

PD106-416 

¼” to 6-Pin Jumper Cable 

PD106-417 

DVD Module (Kit) 

PD251-002 

 

 

OVERHEAD FALLING HAZARD 

TV  can  pose  a  striking  hazard  when  mounted  at  an 
elevated  position.    Use  only  PDI  mounting  brackets, 
support  arms,  and  appropriate  hardware  to  assure  TV 
will not fall from the mounted position.  Failure to do so 
may cause injury or death. 
 

RAIN AND MOISTURE 

WARNING:  To  avoid  the  hazards  of  fire  or  electrical 
shock, DO NOT expose this television to rain or moisture. 

 
OXYGEN ENVIRONMENT 

WARNING:  Do  not  use  in  any  oxygen  tent  or  oxygen 
chamber. Such use may cause a fire hazard. 

 
WET LOCATION 

Apparatus  shall  not  be  exposed  to  dripping  or  splashing 
and no objects filled with liquids, such as vases, shall be 
placed on the apparatus. 

 
CLEANING AND DISINFECTION 

Clean the exterior of this television by removing dust with 
a  lint-free  cloth.  CAUTION:  To  avoid  damage  to  the 
surface of the television, do not use abrasive or chemical 
cleaning agents.  Spot test a new disinfectant by applying 
a test cleaning a non-

obvious small spot on the TV’s back 

cabinet, keypad, and LCD panel.  Allow the disinfectant to 
soak per its instructions and then wipe clean.   Do not use 
the 

disinfectant  if  the  TV’s  surfaces  show  any  sign  of 

discoloration or softening. 
 

PRODUCT MODIFICATION 

Do not attempt to modify this product in any way without 
written  authorization.  Unauthorized  modification  could 
void the user

’s authority to operate this product. 

 

STACKING 

Place  the  unit  in  a  horizontal  place,  and  DO  NOT  lay 
anything heavy on it. 
 

DVD PLAYER 

Because  of  high  voltage  inside  the  unit,  touching 
internal  parts  is  dangerous  and  may  lead  to  serious 
damage to the unit and even personal injury. DO NOT 
attempt 

to 

disassemble 

this 

unit 

under 

any 

circumstance. Only put a DVD or CD into the slot. 
 

OTHER EQUIPMENT 

Use  only  with  the  cart,  stand,  tripod,  bracket  or  table 
specified by the manufacturer or sold with the TV. Use 
caution when moving the cart. 
 

WARNING: 

To  reduce  the  chance  of  fire  or  electric 

shock,  only  utilize  the  accessories  recommended  by 
the manufacture.

 

 
WARNINGS

 

 

CAUTION:   

To  reduce  the  risk  of  electric  shock  does  not 

remove  cover  (or  back).  No  user  serviceable  parts  inside.  Refer 
servicing to qualified service personnel.

 

 

 

This  symbol  is  intended  to  alert  the  user  of  the 
presence  of  important  operating  and  maintenance 
(servicing) 

instructions 

in 

the 

literature 

accompanying the appliance. 

 

 

 

 

This  symbol  is  intended  to  alert  the  user  of  the 
presence  of  uninsulated 

‘dangerous  voltage’  within 

the  product

’s  enclosure  that  may  be  of  sufficient 

magnitude  to  constitute  a  risk  of  electric  shock  to 
persons. 

 
 

 

 

NOTE TO CABLE TV INSTALLER 

This  reminder  is  provided  to  call  the  cable  TV 
systems  installer

’s  attention  to Article  820-40  of  the 

National  Electrical  Code.  The  code  provides 
guidelines  for  proper  grounding  and,  in  particular, 
specifies that the cable ground shall be connected to 
the grounding system of the building, as close to the 
point of the cable entry as practical. 
 

The earth apparatus with Class I 
construction shall be connected to a 
mains socket outlet with a protective 
earthing connection.

 

 

 

 

 

SERVICE INSTRUCTIONS 

CAUTION:  These  servicing  instructions  are  for  use 
by qualified service personnel only. 
To reduce the risk of electric shock, do not perform 
any  servicing  other  than  contained  in  the  operating 
instructions unless you are qualified to do so. 

 

 

 

 

Summary of Contents for PDI-P23LCDE















Reviews: