Communication
System Inc.
Better Solutions Are Within Reach
TM
MODEL NUMBER:
PDI-P23LCDE TV With DVD
Document Number:
PD196-221R1
QUICK START GUIDE
Page 4 of 14
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664
Wall Mounting with Optional Wall Bracket
NOTE:
Across-Room Wiring may need to be completed before mounting the TV. (See Across-Room
Wiring diagram on page 4)
1. Refer to Figure 1. Select a location on the wall
approximately 7 ½ inches below the ceiling.
NOTE:
DO NOT locate AC, Across-Room Wiring,
and CATV Signal outlet
s below the Wall Bracket’s
location as it will cause clearance issues and
interfere with the TV’s cabinet when mounted to the
bracket. Position the Wall Bracket and locate two
mounting holes. Secure the bracket to the wall
(mounting hardware is not included).
2. Refer to Figure 2. Position the Back Mount on the LCD TV
cabinet. Attach with four M4 screws provided.
3. Mate the Back Mount to the Wall Bracket making sure the
pivot pins are retained in the “U” shaped slot. Using the pilfer
security driver packed with the hardware, secure with two
10x32 pilfer screws.
4. Connect the AC line cord, Pillow Speaker Jumper Cable,
and CATV Coax Cable.
5. The TV’s tilt can be adjusted by loosening both Pilfer
Screws, adjusting tilt, and then tightening the screws.
Figure 2