Communication
System Inc.
Better Solutions Are Within Reach
TM
MODEL NUMBER:
PDI-P19LCDC
Document Number:
PD196-126R2
Quick Start Guide
Page 13 of 15
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664
Optional DVD Module Operation
Optional DVD Module Operation
CAUTION: Disconnect the TV’s AC Power Cord from the wall outlet
before installing the DVD module. Failure to do so may result in
catastrophic damage to the module and/or the TV.
DVD Module Installation
NOTE
: The PD251-005 DVD Module is designed for installation in the model PDI-P19LCDC TV. Installation in any other model
TV is not supported
.
Refer to the illustration below and follow the procedures
below to install the DVD Module onto the LCD TV.
1.
Disconnect the TV’s AC Power Cord from the wall
outlet.
2. Remove the Security Screw from the Filler Module.
3. Slide the filler Module out and remove it from the TV.
4. Locate the DVD Interface Ribbon Cable inside the
TV’s Cabinet. Extend the Ribbon Cable and attach to
the PD251-
005 DVD Module’s recessed connector
port located beneath the mounting ear.
5. Slide the DVD module into position taking care to
insert the module’s mounting feet into the keyed
openings.
