PDi PDI-MCA24-AC, Assembly Instructions Manual

Page: 5 / 8

MODEL NUMBER:
PDI-MCA24-AC
Document Number:
PD196-412R2
Assembly Instructions Page 5 of 8
PDi Communication Systems, Inc.
▪
40 Greenwood Ln
▪
Springboro, Ohio 45066 USA
▪
www.pdiarm.com and www.mymedTV.com
▪
Phone 800.628.9870
This document provides the information for the assembly instructions for the Medical Flat-time Cart that works with the 24” A -Series PDi
hospital HDTV.
Tool List
Safety glasses/goggles
Phillips Screwdriver
Adjustable Wrench
Hex Wrench Set
– Inch Series
Included in the Boxes:
The following items are included in the packaging of the Flat-time Cart (NOTE: 24” PDi A -Series Hospital TV and PDi TV Programming
Remote PD108-420 are sold separately.)
•
Medical Cart Base,
•
Medical Cart Column
•
Cord Wrap
•
Handle
•
Short-arm TV Mounting Bracket
• Hardware Kit:
✓
1 each; PD219-142 - 5mm Hex Wrench
✓
1 each; PD219-143 – 6mm Hex Wrench
✓
4 each; PDIBHSCSM8X20 – Screw, M8 x 20mm long, Hex Socket Button Pan Head, Black Oxide
✓ 4 each; PDIBHSCS103238Z – Screw, #10-32UNF x 0.375", Hex Socket Button Head, Zinc Plated
✓ 4 each; PDIBHSCS252050 – Screw, 0.250-20UNC x 0.500", Hex Socket Button Head, Zinc Plated
✓
4 each; PD197-001 – Nut Plate, 0.250-20UNC
✓
4 each; PD151-003-13 – Self-Threading Screw
✓ 4 each; PD151-003-12 – Screw, M8 x 30mm long, Hex Socket Head
✓
4 each; PDIETLWM8 – Lock Washer, M8, External Tooth
✓
4 each; PDIPPHMSM4X710, Screw, M4 x 10mm Lg, Phillips Pan Head, Zinc Plated.
Cart Assembly
1. Set the Column sub-assembly on the workbench as shown.
2. Pre-assemble the Cord Wrap, PD181-851 , with the
screws (2), PDIBHSCS252050 , and Nut Plates (2),
PD197-001 . Leave nuts loose.
3. Slide the nuts into the slot on the column from the top,
with the Cord Wrap oriented as shown, until the bottom
edge is approximately 7inches from the bottom edge of
the column. Tighten the screws with 5/32” hex wrench.
Tighten screws to 30in-lbs.
4. If the unit included an optional Wire Basket, PD151-003-
15 , or Bin, PD180-038 , pre-assemble according to the
directions for these items, and assemble to the column
before installing the Handle.
5. Pre-assemble the Handle, PD151-003-10 , with the
screws (2), PDIBHSCS252050 , and Nut Plates (2),
PD197-001 . Leave nuts loose.
6. Slide the nuts into the slot on the column from the top,
with the Cord Wrap oriented as shown, until the bottom
edge is approximately 7inches from the bottom edge of
the column. Tighten the screws with 5/32” hex. Tighten
screws to 30in-lbs.