10
Connecting to a TV using the Component (YPbPr)
Use the audio and video cables to connect the Y/Pb(Cb)/Pr(Cr) input jacks on the rear
panel of the unit to the external AV signal source.
Ensure that the corresponding input
(e.g: Component 1 or Component 2) is enabled in the “Source Setup” menu of external
AV source.
NOTE:
The Y/Pb/Pr jacks on your DVD player are sometimes labeled Y/Cb/Cr or
Y/B-Y/R-Y. If so, connect the cables to like colors.
Connecting to a TV using the HDMI Input
Follow the figure below to connect an HDMI cable (not supplied) to the HDMI jack on
the rear panel of the TV.
Verify that the corresponding mode (e.g: HDMI 1 or HDMI 2) is enabled in the TV’s
Setup menu.
