8
Document Number: PD196-167R2
Programming the TV
Connect the TV to a Cable TV signal before proceeding. Verify the
handheld remote control operates the TV.
1. Press the setup button on the remote.
2. From the
Setup
menu, select
Channels
.
3. In the
Channels
menu, select
Signal
. Set the signal to one ap-
propriate to your healthcare facility. The possible choices are,
Cable STD
Standard Cable TV
Cable IRC
Incrementally Related Carrier
Cable HRC
Harmonically Related Carrier
Air
Air (Antenna)
4. In the
Channels
menu, select
Auto Program
.
5. In the
Auto Program
menu, select
Mode
. The TV can be set
to search and locate different styles of TV signals;
Analog Only
,
Digital Only
, or both
Analog and Digital
channels. Select the
style of signal.
6. In the
Auto Program
menu, select
Channel Sequence
and
select the manner in which channels are viewed. The possible
selections are:
Interleave A+D
Analog and Digital appear grouped together
All A then D
Analog appear first, followed by Digital
7. The
Additional Digital Signal
selection allows for auto pro-
gramming of a second block of channels using a different signal
type. For example, first Auto Program the TV for
CATV STD
signals, then use the
Additional Digital Signal
set to
AIR
provides
a second auto programming of air type signals to be included
in addition to the channels found during normal Auto Program
searching into the same Service Level.
8. The TV offers 3 discrete groups of channels or
Service Levels
.
Free, Basic, or Premium can each be programmed and used as
needed. Select the desired Service Level to program.
9. Press the
Yes
(Channel Up button) to begin Auto Programing or
No
(Channel Down button) to exit. Auto Programming takes ap-
proximately 2 to 12 minutes.
SETUP
■ Service Level Free
■ Picture ▶
■ Sound ▶
■ Channels ▶
■ Features ▶
■ OSD Language English
■ Sources ▶
■ FM Radio ▶
Position:
Exit: SETUP
Next:
Channel Setup
■ Signal Cable STD
■ Auto Program ▶
■ Add/Delete Channels ▶
■ Clear Service Level ▶
■ Copy Service Level ▶
■ Parental Control ▶
■ Power On Channel ▶
■ Channel Lock Disabled
■ Channel Memory Override Enabled
Position:
Exit: SETUP
Next:
Auto Program
■ Mode Analog Only
■ Channel Sequence Interleave A+D
■ Additional Digital Signal None
■ Free Programmed ▶
■ Basic Blank ▶
■ Premium Blank ▶
Position:
Exit: SETUP
Next:
Confirm Auto Program
■ Confirmation ▶
Exit: SETUP
Yes
No
