PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page
28
of
39
PD196-389R1 PDI-A24, A32, A42, A55
2. Press
▲ or ▼ to highlight Remote Select
3. Press
◄ or ► to select A
,
B, C, or D to match the remote
’s code set.
4. Press the SETUP button to return to the previous menu. To exit, press SETUP until the
programming menus disappear.
5. Try the patient remote to make sure it works with the Bed setting.
6. If it does not, change the remote
’s code setting.
7. Try the remote again.
NOTE:
Some patient remotes do not allow Bed C or Bed D codes.
Blue Screen
1.
Pres
s ▲ or ▼ to lock or unlock on the switch
.
2.
The TV will be all blue when no signal is present, otherwise the panel will be black in color.
Auto Power On
1.
Pres
s ▲ or ▼ to lock or unlock on the switch
.
ECO
1.
Pres
s ▲ or ▼ to lock or unlock on the switch
.
CH/+- change source
External signal sources connected to the TV, such as DVD players or video-game systems, are shown in the
current channel lineup after the highest channel and then shown on the TV. Set this feature to Disabled to
require the activation of the external sources by pressing the remote
’s or the TV’s TV/AV button. Set this feature
to Enabled to allow access to external devices by pressing the channel up or down buttons on a remote or most
pillow speakers.
1. Enter the Common menu.
2. Press
▲ or ▼ to highlight.
CH/+- change source
3. Slide the switch to enable or disable
.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.