background image

  

 

 
 
 
Better Solutions Are Within Reach

®

 

MODEL NUMBER:

 

PDI-772HE-IND 

Document Number:

 

PD196-181R3 

 

Individual Input Port Central Power Supply 

Page 1 of 12 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH 1-800-628-9870  FX 937-743-5664  

 

 

 
WARNING

:  To reduce the risk of fire or electric 

shock, do not expose this apparatus to rain or 
moisture. 

 

WARNING: 

 To prevent injury, this apparatus must 

be securely attached to the wall in accordance with 
the installation instructions. 

 

WARNING:

  Do not install this equipment in a 

confined space such as a cabinet, drop ceiling, or 

similar space. 
 

CAUTION:

  Do not block ventilation openings,.  Install 

in accordance with the manufacturer’s instructions.

 

 
 

 

REGULATORY INFORMATION 

FCC PART 15 

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 
part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 
residential installation.  This equipment generates, 

uses, and can radiate radio frequency energy, and if 
not installed and used in accordance with the 

instructions, may cause harmful interference to radio 
communications. 

However, there is no guarantee that interference will 
not occur in a particular installation.  If this 

equipment does cause harmful interference to radio 
or television reception, which can be determined by 

turning the equipment off and on, the user is 
encouraged to try to correct the interference by one 

or more of the following measures:   

 

 

 
 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the 

equipment and receiver. 

 

Connect the equipment into an outlet on a 

circuit different from that to which the receive 

is connected. 

 

Consult the dealer or an experienced radio/TV 

technician for help. 

 

Modifications 

Any changes or modifications made to this device 

that are not expressly approved by PDi may void the 

user’s authority to operate the equipment.

 

 

Cables 

Connections to this device must be made with 

shielded cables with metallic RFI/EMI connector 
hoods to maintain compliance with FCC Rules and 

Regulations. 
 

Healthcare Grade Power Supply 

The PDi Healthcare series television is specifically 

designed for installation and use in a healthcare 
environment in which installation is limited to a 

nonhazardous area in accordance with the National 
Electrical Code, ANSI/NFPA70. 

 

 

 
 

 

 
 

 
 

 
 

 
 

 

Summary of Contents for PDI-772HE-IND













Reviews: