Document Number: PD196-173R8
PD295-001
Page 6 of 19
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 937-743-6010 Fax 973-743-6554
Connections
The PD295-001 Satellite Interface must be connected to the corresponding TV via standard CAT5 cable. The CAT5 data
cable should not exceed 300 feet in length. A standard USB cable must also be connected to the module and the
corresponding set top box. CAT5 and USB cables are not provided with the Satellite Interface.
PD295-001 is for use with CCI Port only, Not MTI port
Wall Mounted Televisions
Wall Mounted TV - Data Cable Installation
1. Connect one end of the CAT5 cable to the TV’s CCI port. The CCI port is located on the back of the TV with the other
connectors. Be careful not to connect to the MTI port which is usually next to the CCI port.
2. Connect the other end of the CAT5 cable to the RJ45 port on the PD295-001 Satellite Interface.
3. Connect the Type-A end (Flat Connector) of the USB cable to the port marked “USB” on the Satellite Set Top Box.
4. Connect the Type-B end (Square Connector) of the USB cable to the USB port on the PD295-001 Satellite Interface.
Wall Mounted TV - RF Cable Installation
The RF Output Signal cable from each Satellite Set Top Box must also be routed to each remotely located Television.
Please refer to the Satellite Set Top Box installation instructions for details.
