Document Number: PD196-244R12
PD295-002
Page 7 of 29
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Connections
The PD295-002 interface module must be connected to the corresponding TV via standard CAT5 cable. The CAT5 data
cable should not exceed 300 feet in length. The module must be powered via the rack mounted chassis or a standalone
power adapter. The supplied IR Emitter cable must also be connected to the module and adhered to the IR window of the
corresponding set top box. CAT5 and power cables are not provided with the Satellite Interface.
PD295-002 is for use with CCI Port only, Not MTI port
Wall Mounted Televisions
Wall Mounted TV
–
Data, Power, and IR Emitter Cable Installation
1.
Connect one end of the CAT5 cable to the TV’s CCI port.
The CCI port is located on the back of the TV with the other
connectors. Be careful not to connect to the MTI port which is usually next to the CCI port.
2. Connect the other end of the CAT5 cable to the RJ45 port on the PD295-002 interface module.
3. Connect the included IR Emitter cable to the PD295-002 interface module.
4. Remove adhesive backer from IR Emitter and secure it to the IR receiver window of the STB.
5. For chassis mounted interface module, connect chassis power cable to PD295-002. For standalone mounting,
connect power cord PD106-747 to PD295-002.
Wall TV with Standalone Interface Module
