Better Solutions Are Within Reach
®
MODEL NUMBER:
PDI-MCP
Document Number:
PD196-397R2
medTV® Mobile Cart Assembly
Page 8 of 13
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
11.
Remove the four (4) M8x30 socket head cap screws from the bottom of the base,
using the enclosed 6mm hex wrench.
12.
Turn the Base so it is vertical. Keeping the Column horizontal, insert it into the
pocket in the Base, as shown in Figure 10.
Note: It will be easier if the base rest on the rear casters with the brakes set. The
base will be less likely to move, and the pocket is lower so the Column will fit into
the pocket easier.
Note: Take care to ensure cables do not get pinched by the Column.
Figure 10.
13.
Insert the M8x30 Screws through the holes in the bottom of the base. Use the 6mm
hex wrench to tighten completely. See Figure 11.
