background image

 
 
 

PAGE 42 

 

Class 1 Medical 

Rev. 2 

 

16

 

LIMITED WARRANTY 

PLEASE NOTE

 – THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL 

LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4

th

, 1975. 

This warranty is extended only to the original purchaser/user of our products. 
This warranty gives you specific legal rights and you may also have other legal rights, 

which vary from state to state. 

PDG offers warranty replacements for its product (except for third party accessories) to 

be free from defects in materials and workmanship for a period of one (1) year from 

date of purchase.  The side frames and cross members are warranted for the lifetime of 

the original purchaser/user.  If within such warranty period any such product shall be 

proven to be defective, such product shall be repaired or replaced, at PDG’s option. 
This Warranty does not include any labor or shipping charges incurred in replacement 

part installation or repair of any such product.  PDG’s sole obligation and your exclusive 

remedy under this warranty shall be limited to such repair and/or replacement.  
PDG does not warranty third party accessories such as seat cushions, solid backrest, 

Dynamic Rocker Backs (DRB), belts, positioning straps etc and recommends contacting 

the third party manufacturer regarding warranty issues or product support for these 

options. 
For warranty service, please contact the dealer from whom you purchased your PDG 

product. In the event you do not receive satisfactory warranty service, please write 

directly to PDG at the address on the back cover page, provide dealer’s name, address, 

and date of purchase, indicate nature of the defect and, if the product is serialized, 

indicate the serial number. Do not return products to our factory without our prior 

consent.  Limitations and exclusions: the foregoing warranty shall not apply to serial 

numbered products if the serial number has been removed or defaced, products 

subjected to negligence, accident, improper operation, maintenance or storage, 

products modified without PDG’s express written consent including, but not limited to, 

modification through the use of unauthorized parts or attachments; products damaged 

by reason of repairs made to any component without the specific consent of PDG, or to 

a product damaged by circumstances beyond PDG’s control, and such evaluation will be 

solely determined by PDG . The warranty shall not apply to problems arising from 

normal wear or failure to adhere to these instructions. The foregoing express warranty 

is exclusive and in lieu of any other warranties whatsoever, whether express or implied, 

including the implied warranties of merchantability and fitness for a particular purpose, 

and the sole remedy for violations of any warranty whatsoever, shall be limited to repair 

or replacement of the defective product pursuant to the terms contained herein . The 

application of any implied warranty whatsoever shall not extend beyond the duration of 

the express warranty provided herein. The manufacturer shall not be liable for any 

consequential or incidental damages whatsoever.

 

This warranty shall be extended to 

comply with state/provincial laws and requirements. 

 

 

 

 

 

 

 

 

Summary of Contents for BENTLEY













































Reviews: