Pco pixelfly qe, Operating Instructions Manual

Page: 11 / 40

1. Installation and Powering Up
11
!
PCO 2006
pixelfly
1.4 Camera and PCI-Board
Before Powering Up, make the connection between camera
head and PCI-Board.
In case of not using the enclosed cable, please note:
"
Pleas use only Ethernet cables, where all 8 lines are con-
nected (4x twisted pair).
"
The cable quality must be at least category 5, 5+ or higher
"
minimum cable length: 2m
"
maximum cable length: 12.5m
Remark The connectors and cable are identical with Ethernet cables but
there is no Ethernet protocol!
Standard and Compact PCI-Board
The front plates and connectors of the Standard and Compact
PCI-Boards are identical.
Frontplatten und Steckeranordnungen.
Interface 2 is the connection between camera head and PCI-
Board.
The camera can be controlled via Interface 1 (e.g. external trig-
gering, Front-End Processor, ...)
The LEDs show the operating states as follows:
LED 1 (green) control display when connection between camera head and
PCI-Board is ok
LED 1 (red) control display at data transfer
LED 2 (green) Power-On (blinking)
LED 2 (red) control display at external trigger input