Pco dicam C1, User Manual

Page: 45 / 64

45
A2 TECHNICAL DATA PCO.DICAM C4
A2.3 SPECIFICATIONS
sCMOS Sensor
Type of sensor scientific CMOS (sCMOS)
Resolution (h x v) 2048 x 2048 active pixel
Pixel size (h x v) 6.5 µm x 6.5 µm
Sensor format / diagonal 13.3 mm x 13.3 mm / 18.8 mm
Shutter mode single image / double image
Fullwell capacity (typ.) 13 600 : 1 (82.7 dB) P46
27 200 : 1 (88.7 dB) P43
Readout noise
1.1 med / 1.5 rms e
-
single image
2.2 med / 2.5 rms e
-
double image
Dynamic range
15 000 e
-
P46
30 000 e
-
P43
Spectral range 300 nm ... 1100 nm
Dark current
< 0.6 e
-
/pixel/s @ 7 °C
Quantum efficiency
58 % for P43 peak emission @ 545 nm
57 % for P46 peak emission @ 530 nm
Spectral range 300 nm … 1000 nm
DSNU
1.0 rms e
-
PRNU < 0.6 %
Anti blooming factor 1 : 10 000
Image Intensifier 4x
Type HighRes MCP (6 µm channel)
Input window synthetic silica, borosillicate
Output window glass
Photocathode material S20, GaAs, GaAsP (others on request)
Phosphor screen material P43, P46
Image intensifier pitch distance 6 µm
Image intensifier MCP type single stage low resistance MCP for
high strip current
MCP operational modes continuous
gated for enhanced extinction ratio
Image intensifier diameter 25 mm (18 mm optional on request)
Image intensifier system
resolution > 50 lp/mm @ 5% MTF typical (depends
on phosphor)
Shortest gating time 4 ns
Optical Coupling Lens System
“ultra speed tandem lens” between image intensifier & sCMOS
Transmission efficiency
> 30 %
Vignetting < 3 %
Resolution > 60 lp/mm
Scaling rates ß=0.53 for 25 mm intensifier
General
Power supply 100 … 240 VAC
Power consumption 180 W
Weight 43.3 kg
Operating temperature + 10 °C ... + 40 °C
Operating humidity range 10 % ... 80 % (non-condensing)
Storage temperature range - 10 °C ... + 60 °C
Optical interface F-mount (optional Canon mount)
Lens remote controller electronic control for Canon EF lenses
CE / FCC certified yes