PINO 3.0 E Building Instruction August 2018
www.pcm.at
7
Cable mounting:
Mill a hole
into the preformed space for the contacts. Make the
hole big enough, so that the
contacts will not touch the carbon
.
We now use
2 pairs of
contacts
for a redundant
connection.
Glue the contacts together.
Connect the cable as shown
and solder the ends to
BOTH
of the contacts. So you get a
safe, redundant connection.
In order to secure the
soldered wirings you should
glue a
piece of
plywood or GFR
to it.
It is very important to
insulate all the contacts
that could touch the carbon.
We use “Plasti Dip” for such
purposes.
