FW6 Building Instruction February 2015
www.pcm.at
10
6.3 Gluing the radio board
Before you fix the radio
board in the fuselage,
grind
all gluing spots
thoroughly.
In order to
gain full
strength
, it is absolutely
necessary to
fix the radio
board
in the fuselage!
The fuselage breaks when
the servoboard is not
glued well. because of that
you have to strengthen
the gluing also with a
carbon roving.
Before you glue the radio
board, you should first
find
out the optimal position.
To do so, place the radio
board inside the fuselage
without gluing and mount all
servos. The front aileron
servo should be situated
130 mm from the fuselage
tip
.
You can fix the radio board
with a
drop of super glue
to make the position check
easier.
Make sure that all
levers
are freely movable
(also
with canopy mounted), and
that the
deflections
of the
levers are big enough.
If necessary, the edges of the servo arms can be ground down
a bit.
Only now you can you fix the
ballast tube
with thin
super glue
.
Glue the servo board carefully
with epoxy-glue
(for example
UHU 300 endfest or Stabilit, no fast hardening epoxy resin).