Manual
5
Press this key to switch between the different measuring units.
Pressing this key deletes set weight limits.
With this key, you can set the upper weight limit.
With this key, you can set the lower weight limit.
5
Operation
5.1
Turn the scale ON/OFF
Remove all objects from the tray and turn the scale on by pushing the power switch to the “ON” position.
The scale will perform a self-test and zero. After that, the it will switch to the weighing mode.
To turn the scale off, push the power switch to the “OFF” position.
5.2
Zero the scale
When there are no objects on the tray and the scale doesn’t indicate “0”, you can manually zero it by
pressing the
key.
The zeroing function is only available if the deviation is within ±2 % of the measuring range.
5.3
Tare function
By using the tare function, you can determine the net weight by subtracting the weight of an object, like a
container for example.
To do so, place the object on the tray and press the
key. The tare function is now activated. If you
now remove the object from the tray, its weight is indicated as a negative value on the display.
If you press the
key again, you cancel the tare mode.
5.4
Set weight limits
You can set weight limits which trigger an alarm signal, when exceeded.
To set up the upper weight limit, enter the desired value and press the
key to confirm the input.
To set up the lower weight limit, enter the desired value and press the
key to confirm the input.
By pressing the
key, you can eliminate the existing weight limits.
Note: All weight limits have to be entered in kg.
