Manual
3
1
Introduction
Thank you for purchasing a thickness gauge from PCE Instruments.
The PCE-TG 50 is a thickness gauge which stands out because of its small dimensions, the low weight
and its comfortable and easy use. You will be able to use it many years due to its robust casing by simply
following this manual. Read the manual carefully and keep it for potential questions occurring in future.
2
Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
- The device may only be used in approved temperature range
-
The opening of the case should only be done by qualified personnel of the PCE Instruments.
- The instrument should never be placed with the user interface (e.g. keyboard side on a table)
- You should not make technical changes on the device
- The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner
This user's handbook is published from PCE Instruments without any guarantee.
We expressly point to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
3
Specification
Display
4 Digits
Measuring range
1,2 …200 mm
Resolution
0,1 mm
Accuracy
±0.5% ±0.1mm
Sound velocity
5
00 … 9000 m/s
Power supply
4 x 1,5 V AAA batteries
Operation conditions
Temperature: 0 … +50 °C
Rel. Humidity: < 80 %
Rate of measurement
2 measurements per second
Dimensions
140 x 71 x 32 mm
Data output
RS232
Measurement units
mm / inch (selectable)
Weight
Approximately 160 g (incl. batteries)
Delivery content
1 x PCE- TG 50, 1x transportation box, 1 x
ultrasonic sensor, 1 x manual
