PCE Instruments PCE-PHD 1, Manual, Page: 16 / 20

Manual
16
t-CF: Selection of unit (°C or °F)
SAlt: Setting the DO salinity
compensation, only in “do“ mode
High-:
Setting the DO height compensation (meters), only in “do“ mode
Highf:
Setting the DO height compensation (feet), only in “do“ mode
PEr C:
Setting the CD temperature compensation factor, only in “Cd“ mode
tdS: Selection
of CD or TDS, only in “Cd“ mode
t-Set:
Manually setting the temperature compensation value, only in “PH“ mode
ESC: Leaving further settings
To format the memory card
Note:
If you format the memory card, all data saved on it will get lost! When the display shows
“Sd F“
:
1.
Use the arrow buttons to set to “yES“ or “no“.
yES = Format the memory card
no = Do not format the memory card
2.
If you have chosen “yES“, push the Enter button (4). The display shows “yES Enter“.
3.You can format the SD card by pushing the Enter button again.
To format the time / date (year / month / day, hour / minute / second)
When the display shows
“dAtE“
:
1.Use the arrow buttons to change the flashing value.
2.To get to the next value, push the Enter button (4).
3.After making the desired settings, push the SET button to save the changes. The display switches
automatically to the setting of the sampling time.
Note: Once the time has been set, it goes on even when you switch off the device, provided that the
batteries are flawless.
To set the sampling time (hour / minute / second)
When the display shows
“SP-t“
:
1.Use the arrow buttons to change the flashing value.
2.To get to the next value, push the Enter button (4).
3.After making the desired settings, push the SET button to save the changes. The display switches
automatically to the setting of Auto power OFF.
To set Auto power OFF
When the display shows
“PoFF“
:
1.Use
the arrow buttons to set to “yes“ or “no“.
yes = Auto power OFF active
no = Auto power OFF inactive
2.After choosing, push the Enter button to confirm your selection
To switch the beeper on and off
When the display shows
“beep“
:
1.Use the arrow buttons to set to “yes“ or “no“.
yes = the beeper chimes
no = the beeper does not chime
2.Push the Enter button to confirm your selection.
To set the decimal point for the SD card