© PCE Instruments
8
7.3
Wet / dry indicator
Below the measured moisture value, the test instrument shows a moisture evaluation in the form
of a scale on the display. During the measurement, a small marking point above the scale moves
from left to right. The scale has 3 main ranges: DRY / MOIST and WET. These have 5 divisions
each. This indicator is only meaningful if suitable minimum and maximum values are set for the
material to be measured, see chapter 4.2. A minimum value of 70 and a maximum value 850 can
be recommended as a starting value and then the values must be adjusted upwards or
downwards, depending on the desired indication.
8
Battery replacement
If the battery voltage is too low, this is indicated by an icon in the display. You must replace the
batteries when the icon is visible. To do this, remove the screw on the back of the device and
replace the batteries, making sure the polarity is correct when inserting the new batteries
.
9
Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms
10 Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
