© PCE Instruments
7
Line from several points
Creates a line from several reference points.
Arc from 3 points
Creates an arc from 3 reference points.
Freehand line
Creates a line from cursor movements.
Line
Creates a line from 2 reference points.
Perpendicular lines
First, a line is created.
Subsequently, another reference point is used to create a line that is perpendicular to the first
line.
Parallel lines
First, a line is created. Then, with another click, you create the first reference point for the parralel
line.
The start of this is oriented towards the cursor position.
With another click, you can finish the line.
Angle measurement
First, a line is created.
Then create another line from the end point. The smallest angle between the new line and the
original line is measured.
