15
1.Press "SET" key to enter setting mode while meter is at IR mode.
2.Parameters could be set by users including LCD contrast( 1to 9 bright to dark)
Print contrast(1to 9 light to heavy ) Emissivity Unit( or ) Date mode(MM-DD-YY or
DD-MM-YY or YY-MM-DD pressing "ENTER" to select the preferred mode)
Date and time.Please see below figure.
3.Press "SET" twice at IR mode to
enter ID setting Press "Enter" to enter modification mode ID parameter will be
highlight and flashing Choose the desired characters and then toggle "enable" or
disable by pressing "ENTER" key The desired character will appear on printing
data when it is in "enable" mode
12.FUNCTION-Link with PC
Please be reminded that the software & cable for this function is optional and
please consult with your supplier if you would like to order this optional item.
1. Plug the cable to your computer and follow up the software install operation
procedure indicated in software manual.
2.The software could be used for below functions
Upload and Download #1 to #4 procedure data including updating procedure
name and point name.
Download #5 to #8 data logger data
