© PCE Instruments
7
8
Further information
PI =
Polarisation Index
The ratio between the insulation resistance value measured after the
application of the test voltage continuously for 10 minutes to the
insulation resistance value measured after 1 minute of application
DAR = Dielectric
Absoprtion Ratio
The ratio of the insulation resistance value typically measured at 30 sec
and 1 min
AUTO-ZERO
Zero the test leads and the fuse so that only the resistance of the
measurement range is shown when making a measurement.
The audible signal is always enabled. If the resistance is low, you will
hear a sound.
9
Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms
10 Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
