© PCE Instruments
10
11 Lowest and highest measured value
To display the lowest and highest measured values, press the
key briefly during the
measurement.
To display the measured values again, press the
key again or wait for 1 minute.
12 Data output via PDF
To receive the recorded data directly as a PDF, all you need to do is connect the measuring
device to the computer. A mass data memory is then displayed on the computer. From there you
can get the PDF file directly.
Important:
The PDF is only generated when the measuring device is connected. Depending on
the data volume, it may take about 30 minutes until the mass data memory with the PDF file is
displayed.
Under "Logger Name:", the name saved in the software is displayed. The configured alarm limit
values are also saved to the PDF.
Summary of Contents for PCE-HT 72
Page 13: ...PCE Instruments 11...
