© PCE Instruments
9
9
Start and stop manual recording
To use the manual mode, perform the following procedure:
No.
Description
1
First set the meter using the software.
2
After the upload, the display shows "Start Mode" and
.
3
Now press the
key for two seconds to start recording.
4
This indicates that recording has been started.
To cancel the measurement now, proceed as follows:
No.
Description
1
Here you are informed that the recording has started.
2
Now briefly press the
key.
3
The display now shows "MODE" and "STOP".
4
Now press and hold the
key.
5
Normal measurement was resumed and the display shows
.
Important:
When recording is finished, the measuring device must be reconfigured. It is therefore
not possible to resume recording.
10 Display remaining recording time
To view the remaining recording time, briefly press the
key during recording. The remaining
time is displayed under "TIME".
Important:
This display does not take the battery into account.
Summary of Contents for PCE-HT 72
Page 13: ...PCE Instruments 11...