© PCE Instruments
3
5
Battery
To insert a battery, first open the battery compartment. Then insert a CR2032 button battery into
the cap. You can then close the battery compartment. You can check the battery voltage using
the software. When inserting the battery, pay attention to the polarity of the battery.
6
Switching the meter on/off
To switch on the data logger, press and hold the on/off key for 2 seconds. The LED indicator then
lights up as soon as a measured value is saved. You can configure this in the software. To switch
off the data logger, press and hold the key again for 2 seconds.
7
Software
To put the test instrument into operation, first download and install the software "PCE-HT 70" from
our download page.
https://www.pce-instruments.com/english/download-win_4.htm
Instructions for operating the software are provided in the software.
8
Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms
9
Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
