Manual
14
Colour fastness
Staining fastness
Note: When the option CIE XYZ, CIE RGB or CIE L*U*V is active, you can only take standard
measurements.
6 Settings
To get to the settings, press the Menu button
, select “Setting“ and press Enter
.
Here you have different options. Use the arrow keys (
and
) to navigate and confirm the selection by
pressing Enter
.
6.1 Average
You can set the number of measurements which are performed during the measuring procedure. From
these particular measurement results, the average value is generated.
Use the arrow keys (
and
) to adjust the selected digit. Press Enter
to go to the next digit. After
confirming the last digit by pressing Enter
, the averaging is set.
Note: If you set “00” or “01”, there will be no averaging.
6.2 Aperture setting
Here you can choose between the two measuring apertures which are included in the package.
Use the arrow keys (
and
) to select the aperture and press Enter
to confirm.
Note: After changing the aperture, a black and white calibration is necessary.
6.3 Auto save
Here you choose if the measured data is recorded automatically or not. Choose the desired option by
using the arrow keys (
and
) and press Enter
to confirm.
6.4 Language
Here you can set the language of the menu. You can choose between English and Chinese. Select the
desired option by using the arrow keys (
and
) and press Enter
to confirm.
