19
III.3 Power Quality of a Single Phase (1P2W) System
POWER
1 2W
N
V
1
V
1
I
(HARMON)
(POWER)
(HARMON)
60A
100A
100A
10A
1A
a. Turn the power on. Press the POWER and the 1
Φ
3
Φ
buttons to select
the 1P2W system. The type of system will be displayed at the bottom
right of the LCD
b. Connect the two test leads to the voltage terminals L1 and V
N
(Neutral) of
the system.
c. Connect one current probe to the power analyzer input terminal I1.
d. Clamp on to the L1. Make sure the current flows from the front of the
current probe to the back of it.
e. All following parameters of the system will be shown in LCD
For the meaning of each parameter, refer to XIV. NOMENCLATURE.
