6 Functions
This chapter contains an overview of the special functions of the FMC/E.
6.1 Automatic temperature correction
The temperature is automatically corrected while the FME is being set. The
temperature sensor must be connected before the meter is readied for use.
)
Insert the temperature sensor plug into the connection on
the FME until it clicks into place.
Ready the FME for use as described in section 5.2
6.2 The FME memory
The FME can store up to 50 measurement values in its memory. The measurement
values can be stored, retrieved and deleted as follows:
)
Ready the FME for use as described in section 5.2
)
Insert the electrode into the material being measured (see
sections 5.2.1 to 5.2.4).
The display will now show (example)
)
Press the <+> key to store the measurement value in the
memory.
The display will now show
The meter has now stored the measurement value in its
memory. This is shown in the display by the memory
indication ‘MEMO’.
)
Press the <MENU> key to take another measurement.
Summary of Contents for Brookhuis FMC
Page 25: ......
