© PCE Instruments
2
2
Introduction
The anemometer PCE-ADL 11 is a data logger for wind speed. The configuration of the
anemometer is done via the supplied software. The wind speed meter measures various
parameters. These include m/s, km/h, knots, mph and ft/min. In addition to the measurement
parameters, the measurement intervals can be set in the software. The memory has enough
capacity for 60,000 measured values. After completion of the measurement series, the data can
be read out on the computer via the software. The measurement results are displayed either
graphically as a curve or in tabular form.
3
Delivery scope
1 x anemometer PCE-ADL 11
1 x mounting equipment
1 x software
1 x impeller
1 x 3.6 V lithium thionyl chloride battery
1 x user manual
4
Specifications
Measurement range
1.2 ... 30.0 m/s
4.3 ... 108.0 km/h
2.33 ... 58.32 knots
2.69 ... 67.2 mph
236 ... 5906 ft/min
Resolution
0.01 m/s
0.1 km/h
0.1 knots
0.1 mph
1 ft/min
Accuracy
m/s: ±(3 % + 0.20 m/s)
km/h: ±(3 % + 1.0 km/h)
knots: ±(3 % + 0.4 knots)
mph: ±(3 % + 0.4 mph)
ft/min: ±(3 % + 40 ft/min)
Memory
for up to 60000 measured values
Data interface
USB for data transfer
PC software
for data evaluation with graphical
representation
Selectable recording intervals
3 s, 5 s, 10 s, 30 s, 1 min, 5 min, 10 min,
30 min, 1 h, 2 h, 3 h, 6 h, 12 h
Operating status
indicated by red, yellow and green LED
Alarm when extreme values are exceeded
yes
Measuring modes
automatic and manual start of
measurement
Sensor
anemometer
Power supply
lithium thionyl chloride battery, 3.6 V
Mignon
Low battery voltage alarm
Yes
Operating conditions
0 ... +50 °C / 32 ... 122°F, <80 % RH
Max. height above sea level
2000 m / 6561 ft
Weight
49 g / <1 lb
Dimensions
145 x 35 x 30 mm / 5.7 x 1.4 x 1.2 in
