© PCE Instruments
5
6.2
Display information
SD card is full or defective.
Clear and format the SD card
If the indication continues to appear, replace the SD card.
or
Battery level low
Replace the batteries.
No SD card inserted
6.3
Measuring / logging
•
Plug the measuring input connectors into the corresponding channel input, observing
correct polarity.
The current measured values are displayed.
6.3.1
Starting the log function
•
To start the logger, press and hold the "LOG / Enter" key for >2 seconds.
“Scan" quickly appears in the upper part of the display as a confirmation. “Datalogger"
appears between the channel 2 and 3 display. The lettering "Datalogger" flashes and
the control sound is audible at the set log interval (if not disabled).
6.3.2
Exiting the log function
•
To end the log function, press and hold the "LOG / Enter" key for >2 seconds.
The meter returns to measuring mode.
6.4
Backlight
To switch the backlight on or off, press and hold the
"▼" key for >2 seconds.
