19
Indoor data
Measuring interval pressure / temperature: 48 sec
Indoor temperature range: 0°C--50°C (32
℉
to + 122
℉
) (show --- if outside range)
Resolution: 0.1°C (0.2
℉
)
Measuring range rel. humidity: 10%
～
99%
Resolution: 1%
Measuring range air pressure: 700-1100hpa (27.13inHg – 31.89inHg)
Resolution: 0.1hpa (0.01inHg)
Alarm duration: 120 sec
Power consumption
Base station
: 3XAA 1.5V LR6 Alkaline batteries
Remote sensor: 2xAA 1.5V LR6 Alkaline batteries
Battery life: Minimum 12 months for base station
Minimum 24 months for thermo-hygro sensor
Remark: where outdoor temperature is lower than -20°C, make sure proper type of batteries
to be used to assure that the device can get enough power to maintain its function properly.
Normal alkaline batteries is not allow to be used since when outdoor temperature is lower
than -20 °C, the battery’s discharging capability is greatly reduced.
Please help in the preservation of the environment and return used batteries to an
authorized depot.
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
PC Software User Manual
General Information
This Weather Station is a high quality, easy to use weather monitoring system that reads,
displays and records the weather data from internal as well as external sensors. Besides the
internally measured values for indoor temperature, indoor humidity and air pressure the
outdoor sensor will take data for temperature and humidity, wind and rainfall. Operation of
these units is by wireless transmission to the Base Station.
After installing the “EasyWeather” program on this CD-ROM, your PC can display all indoor
data as well as the weather data from the Base Station received from the external sensors.
For operation, simply use the USB cable supplied and connect the Base Station to the PC.
From now on you can start to track current and history weather information at your finger tips.