© PCE Instruments
8
5.2.8
Setting the date and time
To set the date and time, go to the settings, to the item "Data
/ Time". Here, the date and time can be set with the left and
right keys. With the enter key, you can jump to the next item.
6
View measured values
To view the measured values, press and hold the record key
in measurement mode. All saved files are now displayed. The
file name is named and sorted according to the storage date.
Select the desired file with the left or right key and open it
with the enter key.
Now select the desired measuring function from the file. The
measured values are then displayed directly.
The left and right keys can then be used to select and read
each individual measured value.
In addition, the lowest, the highest and the average measured
value are displayed.
Note:
The saved measured values can only be deleted via
the PC.
