© PCE Instruments
7
5.2.5
Automatic power off
To set the automatic power off, go to "Auto-off" in the settings.
Here, you can choose between "None", 2 and 10 minutes or
one hour.
If "None" is selected, automatic power off is permanently
deactivated.
5.2.6
Set alarm limits
To set the alarm limit values, go to the settings and to the item
"Alarm". Here, an alarm limit value can be set for each
measuring function. To change the parameter, use the right or
left key. To move to the next measurement function, press the
enter key repeatedly until you reach your measurement
function.
If an alarm limit is exceeded, the measured value is displayed
in red.
5.2.7
Set display brightness
To adjust the display brightness, go to "Brightness" in the
settings. Here, the brightness of the display can be adjusted.
