© PCE Instruments
6
5.2.4
Setting the data logger
To set the data logger, go to the menu, to the item "Data
logger".Here, the data logger can be set.
Note:
The
data logger is always active.
The options are:
5.2.4.1
Setting the storage rate
To set the storage rate, select "Sampling rate" in the data
logger settings. Here, the storage rate can be set to 1 minute,
15 minutes or 1 hour.
5.2.4.2
Setting the recording time
To set the recording time, select "Duration" in the data logger
settings. You can select "None", 1 hour, 24 hours or 7 days.
If "None" is selected, recording will continue until the meter
switches off automatically or the battery is discharged.
5.2.4.3
Switch off display automatically
To switch off the display automatically, select "Sleep mode"
in the data logger settings. If this function is active, the meter
switches itself off within 2 minutes.
Setting option
Description
Sampling rate
Setting the storage rate
Duration
Setting the recording time
Sleep Mode
Setting whether or not the meter switches off the display when
no entries are made.
