GRATING SPECTROPHOTOMETER OPERATING MANUAL
28
Click "Measurement Mode" to set the standard measurement mode,
including SCI, SCE, SCI+SCE.
Click "Standard Light Source" to set the standard light source.
Click "Color Space" to select color space. At present, it only supports CIE
LAB, CIE Lch, CIE XYZ, CIE Yxy, CIE LUV.
Click "Observer Angle" to set the standard observer angle (2 or 10
degree).
Click "Chroma Coordinates" to enter the corresponding chromatic value,
click "L" to input L value as shown in Figure 32, input the corresponding
L value and confirm. Input all standard values and click
to confirm,
the input standard will be stored in the standard record list, and the
standard index will be cumulative.
Note:
In the instrument, users can’t manually input the reflectance and
the input standard data is only valid in the current observe angle,
measurement mode and light source. In the check standard record
interface, if the observer angle, measurement mode and the light source
changed, the corresponding chromatic data will be displayed as "- - - - -".
