© PCE Instruments
25
Eng
li
s
h
4.2
Delivery contents
The delivery contents are the same for all meters of the PCE-CP series
•
1 x photometer PCE-CP 10 / 20 / 30 incl. cuvette
•
1 x replacement cuvette
•
1 x light protection cover
•
1 x microfibre cloth
•
1 x crushing/stirring rod
•
1 x 10 ml dispensing pipette
•
4 x AA battery
•
1 x quick start guide
•
1 x service bag
•
1 x reagent starter kit (20 x pH, 20 x free chlorine, 10 x combined / total chlorine,
10 x alkalinity, 10 x cyanuric acid)
•
1 x app (free download)
•
1 x PC software (free download)
•
1 x free cloud service
Warning: toxic substances:
Water analysis tablets are for chemical analysis only! Not for oral use! Keep out of reach of
children! Store in a cool and dry place!
Munich Poison Centre: (24/7) +49 (0) 89-19240 (German and English)
5
Battery replacement
ATTENTION:
Only replace the batteries in a dry environment, otherwise damage to the meter or injury to the
user may occur. Also make sure that the meter is dry.
1.
Before replacing the batteries, turn off the power.
2.
Loosen the screws of the battery compartment at the bottom of the instrument.
3.
Remove the cover of the battery compartment and take out the flat batteries.
4.
Insert the new batteries as marked and close the battery compartment.
6
On / off
To switch on the instrument, press and hold the
ON/OFF
key until the start screen is displayed.
To switch off the device, press and hold the
ON/OFF
key.
The
ON/OFF
key can also be used to stop the countdown during the measurement (not
recommended). To do this, briefly press the
ON/OFF
key once during the countdown.
