2
INTRODUCTION
Thank you for purchase of this Thermometer. This device is a
non-contact(infrared) thermometer and contact (probe &
clamp) thermometer. Simply aim the thermometer at the
target and press the measurement button to display the
surface temperature. The distance to target ratio is 1:1
therefore the thermometer should be positioned as close to
the target as possible.
1. FEATURES
⚫
User selectable ºC or ºF
⚫
Data Hold
⚫
Overrange indication
⚫
Automatic Power Off
⚫
Emissivity Digitally adjustable from 0.10 to 1.00
⚫
MAX, MIN, LOCK modes
⚫
Resolution 0.1ºC(0.1ºF)
2. WIDE RANGE APPLICATION
Food preparation, Safety inspectors, Plastic molding,
Asphalt, Marine and Screen printing, measure ink and Dryer
temperature, HVAC/R, Diesel and Fleet maintenance.
3.
ºC
or
ºF
Mode
To change this thermometer from ºC to ºF or from ºF to ºC,
when you using infrared to measuring, firstly turn the
instrument on by pressing the “IRT” button, release the “IRT”
button to hold measuring data. Then pres
s the “MODE”
button four times, the ºC or ºF symbol will flash, press the
“IRT” button or “
△
” button to change the scale. When you
using Probe or Clamp to measuring, you can directly press
“MODE” button once to change the scale.
