www.warensortiment.de
Im Langel 4
D-59872 Meschede
Fon: (49) 0 29 03 976 99-0
BATTERIE REPLACEMENT
The meter displays the remaining battery percentage
when turned on. When the level is below 5%, the - +
symbol on the bottom left of the LCD blinks to indicate
a low battery condition. If the battery level is low
enough to cause erroneous readings, the Battery
Error Prevention System (BEPS) turns the meter
off.
Unscrew the 4 screws located on the back of the me-
ter and carefully replace the 3 AA batteries located in
the battery compartment, while paying attention to
their polarity. Reattach the back making sure that the
gasket is in place and tighten the 4 screws to ensure a
watertight seal.
LCD DESCRIPTION
1. Automatic Temperature Compensation
indicator
2. Stability indicator
3. Battery percentage
4. pH calibration indicator
5. Low battery indicator
6. Selectable temperature unit
7. Secondary display
8. Primary display
9. Measuring unit for primary display
ACCESSORIES
HI 62911
Combination amplified pH electrode
with built-in temperature
sensor and titanium cage working
as matching pin.
HI 7004L
pH 4.01 buffer solution, 500 mL
HI 7006L
pH 6.86 buffer solution, 500 mL
HI 7007L
pH 7.01 buffer solution, 500 mL
HI 7009L
pH 9.18 buffer solution, 500 mL
HI 7010L
pH 10.01 buffer solution, 500 mL
HI 70300L
Storage solution, 460 mL
HI 7061L
Cleaning solution, 460 mL
HI 721312
Hard carrying case
HI 710007
Blue shockproof rubber boot
HI 76405
Electrode holder
SPEZIFICATIONS
Range
-2.00 to 16.00 pH
-5.0 to 105.0°C / 23.0 to 221.0°F
Resolution
0.01
pH
0.1°C / 0.1°F
Accuracy
(@20°C/68°F)
±0.02 pH
±0.5°C up to 60°C; ±1°C outside
±1°F up to 140°F; ±2°F outside
Typical EMC
±0.02
pH
Deviation
±0.2°C or ±0.4°F
Temperature
Compensation
Automatic
pH Calibration
Automatic, 1 or 2 point
with 2 sets of standardized buffers
(4.01/7.01/10.01 or 4.01/6.86/9.18)
Probe (included) HI 62911
amplified pH/temperature probe with built-in
temperature sensor and titanium cage
working as matching pin
Battery Type
3 x 1.5V AA / IEC LR6
Battery Life
approx. 1500 hours
Auto-off
after 8 minutes of nonuse
Environment
0 to 50°C (32 to 122°F); RH 100%
Dimensions
150x80x38 mm (5.9x3.2x1.5”)
Weight
245 g (8.6 oz.)
To clean the meter, it is recommended to use
water.
Eine Übersicht aller Messgeräte finden Sie hier:
http://www.warensortiment.de/messtechnik/messgeraete.htm
Eine Übersicht aller Waagen finden Sie hier:
http://www.warensortiment.de/messtechnik/messgeraete/waagen.htm
WEEE-Reg.-Nr. DE69278128
Bei Fragen kontaktieren Sie bitte die PCE Deutschland GmbH.
